Bachin Arduino Nano Flash Tool

If you buy a new pcs Arduino Mega32p Nano Module for your laser/cnc/drawing machine control board.

You must flash a Firmware matching the machine into it.

It's easy to do.

STEP 1:

Download a software toolkit

bachinflash.zip

WARNINGS

  1. This tool empties everything in the chip and cannot be restored.
  2. Applicable only to the control board of BACHIN MAKR, if used on other control boards, take risks on your own.
  3. Only user for Atmel328P based control board.

STEP 2:

Download a firmware file with .hex suffix. Please select the right firmware matching your machine. If you flashed a wrong firmware, the machine will not work, or very strange. To correct the problem, just flash the correct firmware.

nano_328p_1720_4050_new.zip

nano_328p_ta4.zip

STEP 3:

Connect the Nano Module to your PC with a USB cable.

STEP 4:

Run Flash.exe, click the only button, select the firmware file.

You should get a “Done” message when it success.

  • bachin_arduino_nano_flash_tool.txt
  • Last modified: 2019/12/06 03:27
  • by ljx